The BD-Power 1062027 Stage 3 Transmission Build-It Kit With ProTect68 is designed for use in street performance or towing in your 68RFE equipped 2019-2022 Dodge 6.7L Diesel. This kit features heavy-duty accumulator plate to stop accumulator blow-out and the same parts utilized by BD-Power in their performance transmissions. A custom bonded gasket valve body separator plate significantly lessens cross leaks compared to factory and aftermarket kits, even with line pressures up to 250psi. This kit is ideal for use with transmission pressure tuning.

Notes:

• This kit requires custom transmission tuning or an additional module to command higher line pressure.
• The end user is required to clean, inspect and reuse their solenoid pack gasket. If this gasket cannot be reused, a new one must be purchased together with the solenoid pack.

• Upgraded One Way Clutch/Sprag
• Includes Pan Gasket, 3 Doughnut Seals & Check Ball
• Recommended Full Throttle Max Line Pressure 225-250PSI
• Heavy-Duty Accumulator Plate To Prevent Accumulator Blowout
• Over Drive Clutches 17% Increase & Under Drive Clutches 20% Increase
• Exclusive BD Separator Plate Gaskets Eliminate Cross Leaks & Eliminates P0871 Codes
• Custom Bonded Gasket Valve Body Separator Plate Increases Line Pressure While Stopping Internal Cross Leaks
• BD Durable QT100 Pressure Plates Allow For Increased Clutch Counts, Reduce Deflection & Distortion Within The Clutch Drum