Give your Ram 6.7L Cummins 4WD the look and the ride you are after with the 6" Radius Arm Lift Kit from SDS. Up front these systems use a pair of progressive rate 6" coil springs to provide the extra height and smooth controlled performance in the harshest of terrains. A forged drop pitman arm is supplied to correct steering angles along with a HD bar drop bracket to re-center the front axle. A pair of sway bar drop brackets reposition the OE sway bar along with extended polyurethane bump stops to correctly limit up travel and brake line brackets to allow full droop. To correct the front suspension geometry at the new height a pair of heavy-duty replacement radius arms are supplied to bolt in place of the factory arms. These new radius arms are massive upgrade to the factory stamped units, using tubular construction and a lower cam adjustment to dial in front end caster. Also supplied are your choice of BDS NX2 Nitro shocks or FOX 2.0 Performance Series IF gas shocks for improved ride and performance.

At 6" of lift it is critical to correct the front driveline angle to maintain use of the 4WD. To do this BDS Suspension provides a heavy-duty replacement transmission crossmember as well as a transfer case indexing ring to reposition the front driveline output to allow use of the factory drivelines. The rear suspension is rounded out with your choice of NX2 series or FOX 2.0 shocks. Best of all, this lift kit is covered by the BDS "No Fine Print" warranty.

• Sway Bar Drop Brackets
• Forged Drop Pitman Arm
• HD Track Bar Drop Bracket
• Brake Line Relocation Brackets
• High-Strength Tubular Radius Arms
• Extended Polyurethane Bump Stops
• New BDS Progressive Rate 6" Coil Springs
• All Necessary Mounting Hardware Included
• High Clearance Transmission Cross Member
• Covered Bv The BDS "No Fine Print" Warranty 
• Precision-Built Transfer Case Indexing Rina (6 Bolt or 8 Bolt)
• Choose Between BDS NX2 Nitro Series Shocks Or Fox 2 0 Performance Series Shocks