We are happy to release our newest generation of suspension lifts! Our NEW Affordable Tube 4-Link series. This new badged drop is perfect for those that need an extremely rugged suspension lift, yet still want it to be stylish!

We address everything in this kit. Our coils are designed to mimic the factory specs and provide a great ride. Our rear blocks have the bumpstop pads built in to utilize the factory rear bumpstops that Ford designed in for the heavy hauling these trucks were designed for. Our drop brackets for the radius are the beefiest in the industry!

We went about it a little different. Instead of the drop bracket going up inside the factory radius arm pocket, we designed ours to mount uniquely outside. That adds width and strength. These features cost more to produce, but the end result is unmatched. All our steel is U.S. made and is at our Drops are least ¼”, and in some instances even larger.  

The image inset is courtesy of the Diesel Brothers™ November Truck Giveaway with the modification to replace the RAD drop with our NEW Tube 4-Link! The Stryker RAD Series non 4-Link Lift Kit was used and brand referenced on their promotional video.

• Massive 1.5" diameter forged solid steel construction
• Larger diameter than most, and much larger than factory/OEM
• Simple, easy, bolt-on installation - fits directly in factory location
• Adjustable while mounted, using grade 10.9 hardware
• Forged solid steel construction means no hollow tube and no welds to break
• Allows you to perfectly center your front axle
• Includes upgraded proprietary bushings

• (qty 2) Stryker "Smooth Ride" coils
• (qty 2) Stryker Identity Series milled coil badge with machined logo (above coil)
• (qty 1) Track bar relocation bracket
• (qty 2) Front sway bar drop brackets
• (qty 2) “RAD” HD Identity Series drop brackets
• (qty 2) Front bumpstop drops
• (qty 2) Brakeline drop brackets
• (qty 2) Rear blocks with built in HD bumpstop pads
• (qty 4) U-bolts with hardware

OPTIONAL:

• (qty 2) STRYKER billet and machined radius arm faceplates with stainless hardware
• (qty 2) Identity Series radius arm faceplate template/back spacers
• (qty 1) Drill bit
• (qty 1) 10/32 tap
• All other necessary hardware