Note: Requires a leveling kit and/or at least 2 inches of lift.

The Stryker Off Road Design Dual Steering Stabilizer gives your truck better handling while adding to the look of the suspension!  Our steering stabilizer provides better handling and control of oversized tires by reducing bump steer and front end vibration.  It also reduces ball joint and tie rod wear and tear, and is an easy bolt on installation!

Our Dual Steering Stabilizers are guaranteed to perfectly fit your year model truck.

Some competitors save cost by designing inferior low cost  components like bracket clamps sourced off the shelf from China. Stryker is proud of our MADE IN THE USA sourcing for both our USA Steel and finished welding, assembly and inspection here in Maryville, TN. If you see a kit with what appears to be off the shelf parts you might consider one exclusively designed for your truck.

Stryker designs and manufacturers our Fabricated Dual Steering Stabilizer brackets to match your truck. In OUR world of Rugged Style we designed these to match the quality and requirements of your Super Duty TRUCK!

Stryker Off Road Design is a USA manufacturer of high end suspension components for your Ford Super Duty F250 F350 truck. 

  
We don't cut corners! We are perfectionist! All of our products demonstrate OUR COMMITMENT to provide you with Engineered and Manufactured Rugged Designs with a SENSE OF STYLE! That is why our mounting brackets for our V1 and V2 F250 F450 Dual Steering Stabilizers are engineered with 3/8th inch and 1/4 inch USA STEEL CLAMPS! Some of our low cost competitors use a commercial U-BOLT in its place!  We will leave it to you to make an informed decision how you want to secure the front steering system of your F250 F350 Super Duty Truck.

Note: Requires a leveling kit and/or at least 2 inches of lift.

The Stryker Off Road Design Dual Steering Stabilizer gives your truck better handling while adding to the look of the suspension!  Our steering stabilizer provides better handling and control of oversized tires by reducing bump steer and front end vibration.  It also reduces ball joint and tie rod wear and tear, and is an easy bolt on installation!

Technical Notes:

ONLY WORKS FOR MODELS WITH 2 INCHES OR MORE OF LIFT.

***ADDITIONAL FEES MAY APPLY TO CUSTOM COLORS - CONTACT FACTORY***

• LIFETIME Replacement Warranty! (excludes powder coat).
• MADE IN THE USA.
• CAD Designed and Engineered for the your Super Duty Rugged Style.
• Full SEAM Craftsman MIG Welded for the ULTIMATE in Strength and Durability.
• 1/4" USA STEEL for the confidence  you need!
• Stryker's Craftsman Welders build these in HOUSE here in Maryville, TN!
• Powered Coated in the USA under strict Stryker oversight and inspection.
• And designed for the EXACT Truck Model and Year to ensure all the measurements AND Components MATCH the requirement. Not a bunch of OFF THE SHELF hardware to make something kind of work!

• (2) 3/8" Tie Rod Clamp Plates
• (2) 1/4" Tie Rod Clamps
• (1) Center Mount Plate
• (1) Rear Clamp for Center Mount Plate
• (1) "Stryker" Front Plate
• (2) Spacers (may not be needed)
• (2) Stabilizer Cylinders (if selected)
• All necessary hardware