Mount the Synergy 8725-02 Heavy-Duty Steering Kit With Dual Stabilizer from SDS onto your 2014-2023 Dodge Ram 2500/3500 4WD. The Heavy Duty Steering Kit is a direct bolt-in replacement for the stock drag link and tie rod.

It features an all-new design and components specific to the new radius arm Ram Truck platform. This upgrade provides an immediate improvement in steering feel and strength with no wheel size requirements. The tie rod is made from heat-treated chromoly for maximum strength, while low misalignment dust boots eliminate tie rod flop. The drag link is constructed from high-quality DOM steel tubing for maximum strength. This steering kit is an exceptional product that is unrivaled in the market. It is available with both a single or dual stabilizer option. The single stabilizer steering kit utilizes a stabilizer relocation bracket, while the dual stabilizer kit is an excellent choice for trucks looking to run larger wheels and/or tire combinations. The reinforced 1/4" bracket exceeds the factory rigidity, and the dual dampeners provide exceptional stability during on and off-road conditions. This kit features (2) Synergy stabilizer clamps that are CNC machined from hardened steel to withstand harsh usage. Please purchase this steering kit through our dealer network, which includes Northridge 4x4, 4 Wheel Parts, Quadratec, SDHQ, ORW - Off Road Warehouse, CJC Offroad, and Top Tier Suspensions.

Note:
Drag Link - Replacement Tie Rod Ends: (1) 4134-L, (1) 4160-L

Tie Rod - Replacement Tie Rod Ends: (2) 4138-L

Tie Rod - Steering Stabilizer Clamp 8703-01 required to retain steering stabilizer.

Synergy High Performance Grease recommended (4119) to be used with all Tie Rod Ends.

Synergy Premium Copper Infused Anti-Seize (4118) to be used with all threaded components.

Recommended Steering Stabilizers: 6401-01 (IFP), 985-02-135 (TS), 983-02-158 (ATS).

• Drag Link Bolts Right Into The Factory Mounts With No Additional Wheel Requirements
• Tie Rod Is Over 40% Stronger Than The Stock Tie Rod
• No Factory Drag Link Components Need To Be Reused
• Includes Synergy HD Metal On Metal Tie Rod Ends With Oversized 1 Inch Shank
• Low Misalignment Tie Rod End Boots Are Used To Prevent Unwanted Tie Rod Flop. Eliminates The Steering Dead Spot Commonly Associated With Hydro Assist Setups Single Plane Tie Rod End Used On The Pitman Arm Side To Prevent Unwanted Drag Link Flop Tie Rod Is CNC Formed From 1.75 Inch X .188 Wall Seamless Chromoly Tubing & Heat Treated After Forming Tie Rod Has An Outer Diameter (OD) Of 1.75 Inches And Must Be Used With Synergy Steering Stabilizer Clamp Drag Link Is CNC Formed From 1.50 Inch X .250 Wall DOM Tubing Steering Stabilizer Bracket CNC Formed From 3/16 Inch Steel Steering Stabilizer Bracket Mounting Bolt Has Been Rotated 90 Degrees
• Steering Stabilizer Bracket Allows Fitment Of Steering Stabilizers That Use A 1/2 Inch Mounting Bolt
• Steering Stabilizer Bracket Designed To Fit 1 3/4 Inch Diameter Tie Rods
• Abrasion-Resistant Powder Coat
• Synergv Double Adjuster Sleeve
• Both Ends Of The Bar Use Pinch Bolts Instead Of Jam Nuts
• 100% Bolt-On Components