Replace the failing main radiator in your 2011-2016 Ford 6.7L Powerstroke with the XDP Xtra Cool Direct-Fit Replacement Main Radiator XD291. Made for a bolt-on installation, XDP's Xtra Cool Direct-Fit Radiators feature multiple upgrades for added strength over your OEM unit. Manufactured using special techniques from the HD and Semi industry, the Xtra Cool Radiators are built to a higher standard and provide you with added protection and reliability. The D291 is the main radiator located on the engine side of the core support for your primary cooling system. The primary system cools your engine and engine oil cooler.

High Efficiency Core

XDP's Xtra Cool Radiators are built with High-Efficiency Cores. The upgraded core has more fins per inch with heavy-duty tubes to maximize cooling efficiency in your truck.

Internal Reinforcements

Built with special brazing techniques, the Xtra Cool Radiators feature internally reinforced end tubes and construction techniques to provide additional strength at the outside corners where the core is most vulnerable.

Special Gasket Design

To allow for expansion, contraction, and to handle the flex in the front end of your truck Xtra Cool Radiators are built with a proprietary rubber gasket to increase durability and eliminate failure points found in the OE design.

Revised End Tanks

Revised Tanks add strength to the Xtra Cool Radiator. Paying special attention to the weak points, reinforcement ribs have been added to increase durability. In addition, the plasitc mix used to manufacture the end tanks includes a fiber reinforcement to add strength.

Upgraded Mounting Points

To allow secure mounting in the factory location, and eliminate mounting point failures, the Xtra Cool Radiators integrated mounting points have been strengthened for durability.

Tank Attachment

Unlike the OEM design, Xtra Cool Radiator End Tanks are attached with a heavy gauge steel crimp strip. Instead of using aluminum like the factory, the heavy duty crimp eliminates tank and core separation failures that are common with the factory radiator.
 

Application Note:

This is the replacement for the main (primary) radiator only.

• Direct-Fit
• Upgraded Design For Increased Durability
• High-Efficiency Core To Maximize Cooling

• Row Quantity: 1
• Core Width: 38-3/8"
• Core Height: 27-3/4"
• Core Thickness: 1-5/8"
• Inlet Connection: 2-1/4"
• Outlet Connection: 2-1/4"
• OEM Part# BC3Z8005E, BC3Z8005K